Embodme

 Hi there,

i noticed the latest patch fixed some initial value problems - ty for this!

Still i face some probIems: want to control a CC via Press (note pad) - the Value never goes back to initial 0, sticks around 20 or so and also jumps back to 20 after it reached the 0. When releasing quick it is worse, sometimes i can get back to zero with trying around - but not good for live situation.

I think somehow its releated to materials/sensors nature - too quick release means it can get stuck because unit is not receiving anything - thats fine. But shouldnt be uncontrollable.

Can this be fixed somehow? Maybe by setting the pad to higher start amount or so -

I am on the soft layout, try out the silicone and report back if that is better.

Ok, i noticed, after releasing the press, when the CC hangs - just tap it slightly with really less force, and it resets cleanly to zero

No difference with Silicone Surface - i attached a Video so you can see what i mean - is my unit may defective or is this normal? If someone could verify this behavoir, ty!

I have the same issue. I don't think / I hope it's not material related. Pressure has probably a skew/release time that's a bit too long. If Embodme allows us to set this to our own liking - and I think must allow this - then it'll be fine. Otherwise, the ERAE 2 will be basically a useless slab of tech :)