Embodme

Hi guys,

I see a lot of Erae pads on a stand using the M5 screws (100x100 vesa).
What would you recommend, needs to be stable tho ;)

Best regards,
Mangrove

We recommend the Roland Stand PDS-20 with the APC-33 connecting plate

I got this one, works nicely ;-) Attach to what you like.

https://www.thomann.de/intl/millenium_multiclamp.htm

Thnx you guys!

How do I remove the plugs for the screwholes without damaging anything?

These are stickers, you can peel them of ;)

Hi Embodme I just started looking for a stand for the ERAE Touch I have on order with you.

In your photo recommendation for a stand you are showing the Roland Stand PDS-20 which comes with a plate as shown in your photo.

But above the photo you are saying:

"We recommend the Roland Stand PDS-20 with the APC-33 connecting plate."

Did you mean to say one or the other?  Depending if you have a stand or not.

The Roland Stand PDS-20 or APC-33 since they both have plates.

The APC-33 is a plate that can attached to a stand.

Your wording makes it sound like you need both.

Hey Gary,

This works just fine >>
https://www.thomann.de/intl/millenium_percussion_pad_stand.htm
It has both the stand and connection plate.

Best regards,
G

Hey Gaetan,

Thanks for the recommendation !!!

hey all;

  is this the correct screw/bolt to attach the erea to a plate? Prime-Line M5-0.8 x 12 mm Class 12.9 Metric Black Oxide Coated Steel Hex (Allen) Drive Socket Head Set Screws (25-Pack) 9180864 - The Home Depot