The best stand we recommend is this for the ERAE Touch:
G
Gregg Press
said
2 months ago
I bought one! Now sorry for not getting this but how do I attach it to this?
A
Alex Embodme
said
2 months ago
Hi Gregg,
You have to screw the black Roland plate (clamped to the Stand on the picture above) to the backplate of the ERAE with 10mm M5 screws !
G
Gregg Press
said
2 months ago
You sent me the screw measurements so I can buy them. I get the idea a number of washers are to be used, please advise how many per screen and between the screw and stand or erae and screw or both. Thanks. Also, just confirming I can peel off what seems to be covering the holes?
A
Alex Embodme
said
about 2 months ago
Yes you can remove the sticker on top of the holes!
Make sure you use the washers to not screw too tight and damage the PCB inside the product.
Gregg Press
Based on the holes in the back etc. has anyone found the best stand?
Hey Gregg,
The best stand we recommend is this for the ERAE Touch:
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstOmar
Hey Gregg,
The best stand we recommend is this for the ERAE Touch:
Gregg Press
I bought one! Now sorry for not getting this but how do I attach it to this?
Alex Embodme
Hi Gregg,
You have to screw the black Roland plate (clamped to the Stand on the picture above) to the backplate of the ERAE with 10mm M5 screws !
Gregg Press
You sent me the screw measurements so I can buy them. I get the idea a number of washers are to be used, please advise how many per screen and between the screw and stand or erae and screw or both. Thanks. Also, just confirming I can peel off what seems to be covering the holes?
Alex Embodme
Yes you can remove the sticker on top of the holes!
Make sure you use the washers to not screw too tight and damage the PCB inside the product.
Send us pictures/video if needed!
Steve Boyle
This is a lot cheaper and on the Erae kickstarter page says it fits the Roland spd-sx .https://www.thomann.de/gb/millenium_multipad_stand_bundle.htm