The best stand we recommend is this for the ERAE Touch:
G
Gregg Press
said
about 1 year ago
I bought one! Now sorry for not getting this but how do I attach it to this?
A
Alex Embodme
said
about 1 year ago
Hi Gregg,
You have to screw the black Roland plate (clamped to the Stand on the picture above) to the backplate of the ERAE with 10mm M5 screws !
G
Gregg Press
said
about 1 year ago
You sent me the screw measurements so I can buy them. I get the idea a number of washers are to be used, please advise how many per screen and between the screw and stand or erae and screw or both. Thanks. Also, just confirming I can peel off what seems to be covering the holes?
A
Alex Embodme
said
about 1 year ago
Yes you can remove the sticker on top of the holes!
Make sure you use the washers to not screw too tight and damage the PCB inside the product.
I've ordered the Erae II will it attach directly to the
Roland PDS-20 Pad Stand without the need for the Embode Mounting Plate?
Monarch: Legacy of MonstersMonarch: Legacy of Monsters
r
rastko lazic
said
19 days ago
Hi Rudolph Blinkhorn-Conroy ,
I did not open my Erae II yet but I did open the Mounting Plate box. The Embode Mounting Plate does not screw into the Erae II but sits on it. So you do need the Plate.
I think not screwing into it is great.
The plate looks really well done and has rubber sides to hold the instrument .
Gregg Press
Based on the holes in the back etc. has anyone found the best stand?
Hey Gregg,
The best stand we recommend is this for the ERAE Touch:
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstOmar
Hey Gregg,
The best stand we recommend is this for the ERAE Touch:
Gregg Press
I bought one! Now sorry for not getting this but how do I attach it to this?
Alex Embodme
Hi Gregg,
You have to screw the black Roland plate (clamped to the Stand on the picture above) to the backplate of the ERAE with 10mm M5 screws !
Gregg Press
You sent me the screw measurements so I can buy them. I get the idea a number of washers are to be used, please advise how many per screen and between the screw and stand or erae and screw or both. Thanks. Also, just confirming I can peel off what seems to be covering the holes?
Alex Embodme
Yes you can remove the sticker on top of the holes!
Make sure you use the washers to not screw too tight and damage the PCB inside the product.
Send us pictures/video if needed!
Steve Boyle
This is a lot cheaper and on the Erae kickstarter page says it fits the Roland spd-sx .https://www.thomann.de/gb/millenium_multipad_stand_bundle.htm
Henry Lowengard
Also cheaper and very solid, the head can be angled! Gibraltar 6713e stand, ~$99 American!
I just got mine, the Erae 2 mount fits well!
https://gibraltarhardware.com/products/6713e-6000-series-double-braced-electronic-drum-module-standhttps://gibraltarhardware.com/products/6713e-6000-series-double-braced-electronic-drum-module-stand
Rudolph Blinkhorn-Conroy
I've ordered the Erae II will it attach directly to the
Roland PDS-20 Pad Stand without the need for the Embode Mounting Plate?
Monarch: Legacy of Monsters Monarch: Legacy of Monsters
rastko lazic
Hi Rudolph Blinkhorn-Conroy ,
I did not open my Erae II yet but I did open the Mounting Plate box.
The Embode Mounting Plate does not screw into the Erae II but sits on it.
So you do need the Plate.
I think not screwing into it is great.
The plate looks really well done and has rubber sides to hold the instrument .
hope this helps
best
rastko